Control panel

Digital Programming
Equipment without radio
Gentle stop
LED input indicator
Motor in Alternating Current
Plug-in terminals
Potentiometer

Control panel for 1 motor at 230V, with force regulation, soft stop at the end of the opening and closing operation, easy programming and LED light indicators in the control inputs make it very versatile and practical for the majority of automations.

Equipment with 433 or 868 MHz radio
Gentle stop
LED input indicator
Motor in Alternating Current
Plug-in terminals
Programming via radio

Simplest version of control panel powered at 230V with integrated radio, designed to control 2 motors (electromechanical or hydraulic). Programming allows different offset times in opening and closing, force regulation and buffer stop at the end of opening or closing operation, with led indications for control inputs.

Digital Programming
Equipment with 433 or 868 MHz radio
Gentle stop
LED input indicator
Motor in Alternating Current
Plug-in terminals
Potentiometer
Programming via radio

Control panel powered at 230V with integrated radio designed to control 2 motors (electromechanical or hydraulic). Programming allows different offset times in opening and closing, force regulation and buffer stop at the end of opening or closing operation, with led indications for inputs. It is compatible with an extra radio by SRT Band and SRT card respectively.

Digital Programming
Equipment with 433 or 868 MHz radio
Gentle stop
LED input indicator
Motor in Alternating Current
Plug-in terminals
Programming via radio

Control panel powered at 230V with integrated radio designed to control 2 motors (electromechanical or hydraulic). Programming allows different offset times in opening and closing, force regulation and buffer stop at the end of opening or closing operation, with led indications for inputs. It is compatible with an extra radio by SRT Band and SRT card respectively.

Digital Programming
Direct Current motor
Equipment with 433 or 868 MHz radio
Gentle stop
LED input indicator
Plug-in terminals
Programming via radio

Control unit for two motors with or without radio modul, enables programming different offset times in opening and closing, soft stop at the end of opening, closing operation and obstacle detection (12 or 24 V dc.) light indications for input terminals.

Digital Programming
Equipment without radio
Motor in Alternating Current
Plug-in terminals

Control panel for a 230V motor, suitable for the majority of automations, it does not have force regulation and soft stop at the end of the operations.

Digital Programming
Equipment with 433 or 868 MHz radio
Motor in Alternating Current
Plug-in terminals
Programming via radio

Control unit for one motor at 230V, suitable for the majority of automations, it does not have force regulation and soft stop and the end of the operations.

Equipment without radio
Motor in Alternating Current
Potentiometer

Control panel for one motor, without radio and LED light indications for input terminals.

Equipment with 433 or 868 MHz radio
LED input indicator
Motor in Alternating Current
Plug-in terminals
Potentiometer
Programming via radio

Control unit for one motor with or without radio, force regulation, soft stop at the end of the opening and closing operation, obstacle detection, led light indicator for input terminals.

Digital Programming
Direct Current motor
Encoder
Equipment with 433 or 868 MHz radio
Gentle stop
LED input indicator
Plug-in terminals
Programming via radio

Control panel for motors with or without radio, enables force regulation, soft stop at the end of the opening and closing operations, obstacle detection (version 24V dc.) LED light indications for the input terminals.

Compatibly with Wirelessband
Equipment with 433 or 868 MHz radio
Motor in Alternating Current
Plug-in terminals
Potentiometer
Programming via radio

Control panel powered at 230V with integrated radio, designed for rolling doors whose motors have integrated limit switches as tubular or center arbor of up to 1,2KW. With integrated WIRLESSBAND. Product can be finished with membrane and courtesy light.

Compatibly with Wirelessband
Encoder
Equipment without radio
Green Touch System
LED input indicator
Motor in Alternating Current
Plug-in terminals
Potentiometer

Control panel for 1 motor at 230 or 380 Vac single-phase or three-phase with neutral, it has power stage with safety contactors, it is available with magnetic motor circuit breaker, finished industrial or domestic housings. It is compatible with WIRELESSBAND system.

Compatibly with Wirelessband
Encoder
Equipment without radio
LED input indicator
Motor in Alternating Current
Plug-in terminals
Potentiometer

Control panel powered at 230V mono phase for 1 motor at 230 V three-phase, power stage with frequency inverter, allows control speed as programming the acceleration and deceleration docks. Product finished industrial housings. It is compatible with WIRELESSBAND system by SRT Band card.

Compatibly with Wirelessband
Encoder
Equipment without radio
Green Touch System
LED input indicator
Motor in Alternating Current
Plug-in terminals
Potentiometer

Control panel for 1 motor at 230 Vac three-phase, it has power stage with inverter, enable control speed as programming the acceleration and buffer closing for ramp. Finished with Industrial housing. It is compatible with WIRELESSBAND system.

Compatibly with Wirelessband
Encoder
Equipment without radio
LED input indicator
Motor in Alternating Current
Plug-in terminals
Potentiometer

Control panel for 1 motor at 230 or 380 V single-phase or three-phase with neutral, power stage with safety contactors, it is available with magnetic motor circuit breaker, finished industrial or domestic housings. It is compatible with WIRELESSBAND system by SRT Band card.

Motor in Alternating Current
Plug-in terminals

Control panel for hydraulic cylinders at 380 Vac three-phase for ramps functions as a complement for docks, with or without lip.

Digital Programming
Equipment with 433 or 868 MHz radio
Motor in Alternating Current
Plug-in terminals

Control panel for 1 motor at 230 or 120 Vac depending on the version. Up to 0,75KW, with integrated radio receiver. For motor rolling shutters and tubular motors or center arbor with integrated limit switches. Output for flashing light.

Digital Programming
Equipment with 433 or 868 MHz radio
Motor in Alternating Current
Plug-in terminals

Control panel with integrated radio module, designed for rolling doors, for tubular motors or centre arbor of up to 0,75 CV.

Digital Programming
Equipment without radio
Gentle stop
LED input indicator
Motor in Alternating Current
Plug-in terminals

Control panel for sliding doors with 230V motor, with or without radio, with force regulation and soft stop on opening and closing operation (version MN or SLIDER 1H0).

Digital Programming
Equipment with 433 or 868 MHz radio
Gentle stop
LED input indicator
Motor in Alternating Current
Plug-in terminals
Programming via radio

Control unit for sliding doors with 230V motor, with or without radio, with force regulation and soft stop operation, opening and closing.

Equipment without radio
Gentle stop
LED input indicator
Motor in Alternating Current
Plug-in terminals
Potentiometer

Control panel for sliding doors with 230V motor, with or without radio, with force regulation and soft stop in opening and closing operation(version MN or SLIDER 1H0).

Digital Programming
Encoder
Equipment with 433 or 868 MHz radio
Gentle stop
Motor in Alternating Current
Plug-in terminals
Programming via radio

Control panel for sliding doors with 230V motor, with or without radio, with force regulation and gentle operation stop, opening and closing (version MN or SLIDER 1H0).

Digital Programming
Direct Current motor
Encoder
Equipment with 433 or 868 MHz radio
Gentle stop
LED input indicator
Plug-in terminals
Programming via radio

Control panel for sliding doors with 220V motor, with or without radio, with force regulation and soft stop in opening and closing operation(version MN or SLIDER 1H0).

Motor in Alternating Current
Plug-in terminals

Control panel for hydraulic pistons to triphase 380Vac for table functions in scissor setting.